Label Print Master Support

Need help designing or printing labels? Start with the answers below. If you can't find what you need, email milo@milomatic.dev and include your iPhone model, iOS version and printer model.

Which printers are supported?

Phomemo M110 / M110S, M120, M200, M220, M221, M250 and M260. Other Phomemo printers (such as M02, D30 or Q30) use a different protocol and are not supported. You can see the list in the app: tap ? on the home screen.

Label Print Master is an independent app and is not made by or affiliated with Phomemo.

The app can't find my printer

• Turn the printer on and make sure it has paper loaded.
• Allow Bluetooth for the app: iPhone Settings › Print Master › Bluetooth.
• Disconnect the printer from other apps or phones – it can only be connected to one at a time.
• Keep the iPhone close to the printer and try again.
• Do not pair the printer in iPhone Bluetooth settings; the app connects to it directly.

My print is off-centre

Each label type can be calibrated. Open the print panel, tap Calibrate, print a test label and nudge the position until the frame lines up with the label. The setting is saved for that label shape and size.

The print is too light or too dark

Change Density in the print panel (Light, Normal or Dark). Pictures are converted to black-and-white dots; if a photo looks too busy, select it and try another dithering style (Atkinson, Floyd or Ordered).

What label sizes can I use?

Round labels (25, 30, 40, 50 mm) and rectangular labels (30×30, 40×40, 50×50, 40×30, 50×30 mm), or set a custom size. Tap the size at the top of the editor to change it.

Fonts or icons won't load

Fonts and icon search are downloaded from the internet. Check your connection. Fonts you have already downloaded are kept on your iPhone and usually work offline.

How do I get my labels on another device?

Turn on Sync with iCloud in the app's Settings (gear on the home screen) on both devices, signed in to the same iCloud account. Labels, pictures, tags and favourite fonts sync automatically.

How do I select an element hidden behind another?

Hold your finger still on the spot and choose the layer from the menu that appears, or open the layers list from the top bar. You can change the hold time in Settings › Layer selection delay.

Privacy

The app collects no personal data. Read the full Privacy Policy.